aoa体育平台

aoa体育平台有限公司 aoa体育平台有限公司
加工技术热线:18660816658 网站地图
  • 您当前位置: 首页>>新闻动态>>aoa体育平台>>怎样正确识别正宗富美家抗倍特板?

    aoa体育平台

    怎样正确识别正宗富美家抗倍特板?

    来源://atlasautoparts.net/ 日期:2023-04-28 发布人:admin
    树脂层叠后,再用模板在高温(150℃)高压(1430psi)的环境下压制而成的,厚度可依需要调整牛皮纸的张数,从1.6mm到25mm皆可制作,材料密度为1450kg/m3左右,现在国内很多厂家都能这种抗倍特板,生产厂家主要集中在常州横林镇,厂家有十来家,并且出现了相应配套抗倍特板深加工的企业,因为这种材料比较贵,后来市场上出现了便宜的二代抗倍特板和更便宜的三代抗倍特板,二代抗倍特板和三代抗倍特板的工艺和一代抗倍特板工艺完全不一样,业内人士都认为是假抗倍特板,板材在防潮性,耐磨性,耐撞击性等主要指标上都比一代板要差。
    After resin lamination, it is pressed using a template in an environment of high temperature (150 ℃) and high pressure (1430psi). The thickness of the kraft paper can be adjusted according to needs, ranging from 1.6mm to 25mm, and the material density is around 1450kg/m3. Currently, many domestic manufacturers can use this type of anti double special board, mainly concentrated in Henglin Town, Changzhou. There are more than ten manufacturers, and corresponding supporting enterprises for deep processing of anti double special boards have emerged, Due to the high cost of this material, cheaper second-generation and cheaper third-generation anti double special plates emerged in the market. The process of second-generation and third-generation anti double special plates is completely different from that of first-generation anti double special plates. Industry insiders believe that they are fake anti double special plates, and the main indicators of the plate material, such as moisture resistance, wear resistance, and impact resistance, are worse than those of first-generation plates.
    工艺不一样,二代抗倍特板和三代抗倍特板是密度板的工艺,它不是牛皮纸压出来的,是木纤维加胶水压出来的。
    The process is different. The second generation and third generation anti doubling boards are made from density board technology. They are not made from kraft paper, but from wood fiber with glue and water pressure.
    富美家抗倍特
    第二:板材密度不一样,一代板密度1450kg/m3左右,密度比较大,放在水里立即下沉,下沉速度很快。
    Secondly, the density of the board is different. The density of the first generation board is around 1450kg/m3, which is relatively high. When placed in water, it immediately sinks and the sinking speed is very fast.
    二代抗倍特板板材密度1100kg/m3,放在水里缓慢下沉,三代抗倍特板密度900kg/m3,不会下沉。
    The density of the second generation anti doubling board is 1100kg/m3, which slowly sinks when placed in water. The density of the third generation anti doubling board is 900kg/m3, which will not sink.
    第三:味道不一样,一代抗倍特板截面没有味道,二代和三代抗倍特板截面有胶水甲醛的味道。
    Thirdly, the taste is different. The first generation of anti beta panels have no taste in the cross-section, while the second and third generation of anti beta panels have a smell of adhesive formaldehyde in the cross-section.
    第四:截面手感不一样,一代抗倍特板锯开后的截面摸上去手感光滑,二代抗倍特板锯开后的截面摸上去
    Fourth: The cross-sectional feel is different. The first generation anti Beite board has a smooth feel when sawn open, while the second generation anti Beite board has a smooth feel when sawn open
    手感比较粗糙,三代抗倍特板截面摸上去很粗糙。
    The feel is relatively rough, and the section of the third-generation anti magnification board feels very rough.
    第五:颜色不一样,一代抗倍特板截面是黑色的,二代抗倍特截面颜色为黑灰色,三代抗倍特截面颜色又是灰白色。
    Fifth: The colors are different. The first generation of anti magnification panels have a black cross-section, the second generation of anti magnification panels have a black gray cross-section, and the third generation of anti magnification panels have a gray white cross-section.
    联系我们

    产品销售热线:18660816658

    技术方案咨询:18560211715

    仓库地址:济南市槐荫区河海工业园9号

    九江工厂:九江市江东大道3号

    台湾新竹工厂:台湾新竹

    泰国曼谷工厂:泰国曼谷

    关注我们
    aoa体育平台有限公司 备案号: 网站地图 xml txt 技术支持:流量统计

    截屏,微信识别二维码

    微信号:18660816658